b'TALENT PIPELINE: PUBLICATIONS:Ching-Heng Shiau, student Shiau, C.-H., M. McMurtrey, R. OBrien, N. Jerred, R. Scott, J. Lu, X. Zhang, Y. Wang, at Texas A&M University L. Shao, and C. Sun, Deformation behavior and irradiation tolerance of additively Fei Teng, student manufactured 316L stainless steel, Materials and Design, 204 (2021) 109644.at Oregon State University Sun, C., Y. Wang, M. McMurtrey, N. Jerred, F. Liou, and J. Li, Additive manufacturing Panayotis Manganaris, student for energy: A review, Applied Energy 282 (2021) 116041.at University of CincinnatiRigel Hanbury, student at University Zhang, X., M. McMurtry, L. Wang, R. OBrien, C.-H. Shiau, Y. Wang, R. Scott, Y. Ren, of Michigan and C. Sun, Evolution of microstructure, residual stress, and tensile properties Sudipta Biswas, INL postdoc of additively manufactured stainless steel under heat treatments, Journal of The Minerals, Metals & Materials Society (JOM) 72 (2020) 4167.McMurtry, M., C. Sun, R. E. Rupp, C.-H. Shiau, R. Hanbury, N. Jerred, and R. OBrien, Investigation of the irradiation effects in additively manufactured 316L steel resulting in decreased irradiation assisted stress corrosion cracking susceptibility, Journal of Nuclear Materials: Special Edition on Additive Manufacturing 545 (2021) 152739.PRESENTATION:McMurtrey, M., G. Was, and X. Lou, SCC and IASCC of printed stainless steel, The Minerals, Metals & Materials Society Exhibition 2020, San Diego, CA, USA, Feb. 2327, 2020.Microstructure of AM-316L and wrought 316L detailed using electron backscatter diffraction characterization: (a) AM-316L specimen with the build direction being shown and (b) the wrought 316L specimen.93'